Poland
pl
English
Technical data
Technical data - electrical ratings
- Voltage supply
- 24 VDC ±10 %
- Current consumption
- ≤30 mA (without external load)
- Current load
- ≤1 A (connection cable)
- Display
- LCD, 7-segment display, 2-lines, backlit
- Number of digits
- 6-digits
- Measuring principle
- Absolute multiturn measuring system
- Steps per revolution
- 2304
- Number of revolutions
- 4096 / 12 bit
- Spindle pitch
- ≤23 mm (programmable)
- Interface
- CANopen®
- Profile conformity
- CANopen® CiA
- Communication profile DS 301
- LSS profile DSP 305
- Device profile DS 406
- Programmable parameters
- Display position horizontal/vertical
- Measuring unit mm/inch
- Counting direction
- Spindle pitch
- Spindle tolerance
- Positioning direction
- Direction arrows
- Tolerance window
- Round up/down
- Motive positioning
- Suitable for DC motor connection with 4 control inputs 24 V (CCW rotation, CW rotation, low speed ≤4 rpm, high speed ≤100 rpm)
- Emitted interference
- EN 61000-6-4
- Interference immunity
- EN 61000-6-2
- Approval
- UL approval / E63076
Technical data - mechanical design
- Shaft type
- ø25 mm (through hollow shaft)
- Operating speed
- ≤600 rpm (short-term)
- Protection EN 60529
- IP 55 (with mounted mating connector)
- Operating temperature
- -10...+50 °C
- Storage temperature
- -20...+70 °C
- Relative humidity
- 80 % non-condensing
- Resistance
- EN 60068-2-6
- Vibration ±3.5 mm - 5-26.9 Hz, 10 g 26.9-500 Hz
- EN 60068-2-27
- Shock 5 g, 30 ms
- Torque support
- Torque pin provided at housing
- Connection
- Connector 2xM12, male/female, 5-pin, cable length 300 mm
- Connector M16, female, 12-pin, cable length 500 mm, for motor
- Operation / keypad
- Two buttons for format adjustment in jog mode
- Dimensions
- 56 x 106 x 84 mm
- Mounting type
- Directly by means of grub screw
- Weight approx.
- 450 g
- Material
- Polycarbonate black, UL 94V-0
Software
Software
-
NM172 - EDS
Downloads
Data sheet
-
Data sheet – NM172.223AA01
-
Data sheet – NM172.223AA01
-
Data sheet – NM172.223AA01
Quickstart
-
NM170, NM172, NM174
Software Manual
-
NM170, NM172, NM174
-
NM170, NM172, NM174
CAD
-
NM172 / STEP
Accessories
Connectors and cables
|
Cable with male/female M12, 5-pin, straight, A-coded, 2 m (ESG 34C/KSG34C)
Article no.: 11201509 |
|
|
|
Cable with male/female M12, 5-pin, straight, A-coded, 5 m (ESG 34C/KSG34C)
Article no.: 11201520 |
|
|
Extension cable SPA-motor (male/female) M16, 12-pin, 1 m (Z 165.E01)
Article no.: 11054456 |