EN580C.ML-SU06.GH1PB.21160.A

Article no.: 11269250

Encoder multiturn / bus cover
Optical sensing method
Resolution: singleturn 21 bit (default: 13 bit), multiturn 16 bit (default: 16 bit)
Total resolution up to 31 bit
Synchro flange
Interface: Profibus-DPV0
Internal continuity check with diagnostic information by bus
Maximum resistant against magnetic fields
Gear factor adjustable via numerator / denominator

available on request

Technical data

show all

Technical data - electrical ratings

Voltage supply

8...30 VDC

Reverse polarity protection

Consumption w/o load

≤100 mA (24 VDC)

Initializing time typ.

180 ms after power on

Interface

Profibus-DPV0

Function

Multiturn

Device adress

Rotary switches in bus cover

Steps per revolution

≤2097152 / 21 bit

Number of revolutions

≤65536 / 16 bit

Absolute accuracy

±0.01 °

Sensing method

Optical

Code

Binary

Interference immunity

EN 61000-6-2

Emitted interference

EN 61000-6-3

Programmable parameters

Steps per revolution
Number of revolutions
Preset
Scaling
Rotating direction
Gear factor

Diagnostic function

Position or parameter error
Multiturn sensing
Operating hour counter

Status indicator

DUO-LED integrated in bus cover

Approval

UL approval / E217823

Technical data - mechanical design

Size (flange)

ø58 mm

Shaft type

ø6 x 10 mm, solid shaft with flat

Flange

Synchro flange

Protection EN 60529

IP 54 (without shaft seal)

Operating speed

≤6000 rpm (+25 °C)

Starting acceleration

≤1000 U/s²

Starting torque

≤0.02 Nm (+25 °C, IP 54)

Admitted shaft load

≤40 N axial
≤80 N radial

Material

Housing: aluminium
Flange: aluminium
Bus cover: zinc die-cast
Shaft: stainless steel

Operating temperature

-40...+85 °C (see general information)

Relative humidity

95 % non-condensing

Resistance

EN 60068-2-6
Vibration ±0.75 mm - 10-58 Hz, 10 g - 58-2000 Hz
EN 60068-2-27
Shock 200 g, 3 ms

Weight approx.

550 g

Connection

Connector 3xM12

Software

show all

Software

EN580C / Multiturn - describing file
- (zip | 2 KB)

Downloads

show all

Data sheet

Data sheet – EN580C.ML-SU06.GH1PB.21160.A
- FR (pdf | 746 KB)
Data sheet – EN580C.ML-SU06.GH1PB.21160.A
- DE (pdf | 753 KB)
Data sheet – EN580C.ML-SU06.GH1PB.21160.A
- EN (pdf | 761 KB)

Quickstart

EN580C.ML
- EN/DE (pdf | 1 MB)

Software Manual

EN580C - Profibus
- DE (pdf | 2 MB)
EN580C - Profibus
- EN (pdf | 2 MB)

Certificates / approvals

UL-Listing: E217823
- (pdf | 263 KB)

Declaration of conformity

DoC / CoC - EN580C
- BG/CZ/DE/DK/EN/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SI/SK (pdf | 264 KB)

CAD

EN580C.xL-SU06.GH1PB.xxxx.A / IGES
- (zip | 1 MB)
EN580C.xL-SU06.GH1PB.xxxx.A / STEP
- (zip | 271 KB)
EN580C.xL-SU06.GH1PB.xxxx.A / PARASOLIDS
- (zip | 556 KB)

Accessories

show all

Mounting accessories

	Set of eccentric fixings type A Article no.: 11065545	With 3 eccentric fixings type A
	Mounting adaptor For encoders with synchro flange Article no.: 10117667	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount
	Set of eccentric fixings for mounting clamp (10117667) Article no.: 10117668	With 3x eccentric fixings, screws and nuts
	Bearing flange for encoders with synchro flange (Z 119.035) Article no.: 10158124	For all encoder with synchro flange and 6 mm shaft Material: Aluminium, bare
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft Article no.: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments