Retro-reflective sensors - hygiene |
Retro-reflective sensors - hygiene |
|
|
|
|
|
|
|
Ambient conditions | ||
Operating temperature | -30 … +60 °C | -25 … +60 °C |
Protection class | IP 68/69K & proTect+ | IP 68/69K & proTect+ |
Storage temperature | -30 … +70 °C | |
Electrical data | ||
Current consumption max. (no load) | 25 mA | 40 mA |
Current consumption typ. | 20 mA | 30 mA |
Output circuit | PNP | Push-pull |
Output current | 100 mA | 100 mA |
Output function | Light / dark operate | Light / dark operate |
Response time / release time | < 1 ms | < 0.49 ms |
Reverse polarity protection | Yes | Yes |
Short circuit protection | Yes | Yes |
Voltage drop Vd | <1.8 VDC | <3 VDC |
Voltage supply range +Vs | 10 … 30 VDC | 10 … 30 VDC |
General data | ||
Actual range Sb | 3 m | 7.5 m |
Alignment / soiled lens indicator | Flashing light indicator | |
Alignment optical axis | < 1° | |
Approvals/certificates | Ecolab Adapted from EHEDG |
Ecolab Adapted from EHEDG |
Light indicator | LED yellow | LED yellow |
Light source | Pulsed red LED | Pulsed PinPoint LED |
Nominal range Sn | 3.5 m | 8 m |
Polarization filter | Yes | Yes |
Power on indication | LED green | |
Sensitivity adjustment | No | Teach-in: remote |
Special type | Hygienic design | Hygienic design |
Suppression of reciprocal influence | Yes | Yes |
Type | Retro-reflective sensor | Retro-reflective sensor |
Wave length | 660 nm | 630 nm |
Mechanical data | ||
Connection types | Flylead connector M12, L=300 mm | Flylead connector M12, L=300 mm |
Depth | 34.3 mm | 36.4 mm |
Design | Rectangular | Rectangular |
Front (optics) | PMMA | PMMA |
Height / length | 52.2 mm | 47.7 mm |
Housing material | Stainless steel 1.4404 (V4A) | Stainless steel 1.4404 (V4A) |
Width / diameter | 19.6 mm | 20.2 mm |