Gigabit Ethernet, 8 Megapixel, Monochrome

  • 2848 x 2832 px
  • Sony IMX546
  • 2/3" CMOS
  • 15 fps
  • Gigabit Ethernet

Gigabit Ethernet, 8 Megapixel, Monochrome

  • 2848 x 2832 px
  • Sony IMX546
  • 2/3" CMOS
  • 15 fps
  • Gigabit Ethernet
Acquisition formats
Image formats, aquisition frame rate max. (Burst Mode) Full Frame, 2848 × 2832 px, max. 16 fps Full Frame, 2848 × 2832 px, max. 16 fps
Image formats, interface frame rate max. Full Frame, 2848 × 2832 px, max. 15 fps
Binning 2×2, 1424 × 1416 px, max. 55 fps
Binning 2×1, 1424 × 2832 px, max. 16 fps
Binning 1×2, 2848 × 1416 px, max. 16 fps
Full Frame, 2848 × 2832 px, max. 15 fps
Binning 2×2, 1424 × 1416 px, max. 59 fps
Binning 2×1, 1424 × 2832 px, max. 16 fps
Binning 1×2, 2848 × 1416 px, max. 16 fps
Pixel formats Mono8
Mono10
Mono12
Mono12 Packed
Mono8
Mono10
Mono12
Mono12 Packed
Camera features
Acquisition / Interface Burst Mode
Adjustable Framerate
Device Link Throughput Limit
Internal Image Buffer
Burst Mode
Adjustable Framerate
Device Link Throughput Limit
Internal Image Buffer
Additional Functions User Set
Integrated temperature sensor
Readable additional information (e.g. sensor information)
Save Custom Data
User Set
Integrated temperature sensor
Readable additional information (e.g. sensor information)
Auto Functions Exposure Auto
Gain Auto
Exposure Auto
Gain Auto
Basic Functions Exposure
Gain
Trigger / Exposure Active (Flash)
Binning 2x2
Partial Scan
Offset
Free Running Mode (Live Image)
Exposure
Gain
Trigger / Exposure Active (Flash)
Binning 2x2
Partial Scan
Offset
Free Running Mode (Live Image)
Calibration data Camera calibration data (user defined storage for intrinsic / extrinsic camera parameters, and geometry distortion values)
Customer data storage (128 bytes user defined)
Image Pre-processing Image Flipping (X/Y)
LUT / Gamma
Image Flipping (X/Y)
LUT / Gamma
Internal image buffer 185 MB
8 image (Trigger Mode)
1 image (Free Running Mode)
185 MB
8 image (Trigger Mode)
1 image (Free Running Mode)
Process Synchronization Events
Timer
Trigger Delay
Debouncer
Counter
Sequencer
Trigger via Action CMD (GigE)
Additional Output Modes (e.g. Trigger Ready)
PWM (PWM Duration / PWM Duty Cycle)
4 power outputs with up to 120 W (max. 48 V / 2.5 A)
Selectable Output format (e.g. Tri State, Push Pull)
Chunk data inside transferred image
Encoder support via Counter End trigger source
Events
Timer
Trigger Delay
Debouncer
Counter
Sequencer
Trigger via Action CMD (GigE)
Additional Output Modes (e.g. Trigger Ready)
PWM (PWM Duration / PWM Duty Cycle)
4 power outputs with up to 120 W (max. 48 V / 2.5 A)
Selectable Output format (e.g. Tri State, Push Pull)
Chunk data inside transferred image
Encoder support via Counter End trigger source
Synchronization free running
trigger
free running
trigger
Trigger delay 0 … 2 sec, tracking and buffering of up to 256 trigger signals 0 … 2 sec, tracking and buffering of up to 256 trigger signals
Trigger sources Hardware
Software
ActionCommand
Hardware
Software
ActionCommand
Conformity
Conformity CE
RoHS
CE
RoHS
Data quality (EMVA 1288 typical)
Dark noise 2.42 e- 2.42 e-
Dynamic range 69.9 dB 69.9 dB
Quantum efficiency 68 % @ 535 nm 68 % @ 535 nm
Saturation capacity 9533 e- 9533 e-
Signal-to-noise ratio 39.8 dB 39.8 dB
Digital I/Os
Lines 4 input lines
4 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A)
4 input lines
4 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A)
Output line sources Off
Exposure Active
Timer1
Readout Active
User0
User1
User2
TriggerReady
Off
Exposure Active
Timer1
Readout Active
User0
User1
User2
TriggerReady
Electrical data
Power consumption Approx. 2.3 W @ 12 VDC and 15 fps
Approx. 3.0 W @ 48 VDC (PoE) and 15 fps
Approx. 2.9 W @ 12 VDC and 15 fps
Approx. 3.6 W @ 48 VDC (PoE) and 15 fps
Voltage supply range +Vs 12 … 24 V DC (external power supply)
36 … 57 V DC (Power over Ethernet)
12 … 24 V DC (external power supply)
36 … 57 V DC (Power over Ethernet)
Environmental conditions
Humidity 10 … 90 % (non-condensing) 10 … 90 % (non-condensing)
Operating temperature 0 … +65 ° @ T = measurement point 0 … +65 ° @ T = measurement point
Protection class IP 40 (with mounted lens and cable)
IP 54 (with mounted lens and cable)
IP 65 (with mounted tube and cable)
IP 67 (with mounted tube and cable)
IP 69K (with stainless steel housing accessory)
IP 40 (with mounted lens and cable)
IP 54 (with mounted lens and cable)
IP 65 (with mounted tube and cable)
IP 67 (with mounted tube and cable)
IP 69K (with stainless steel housing accessory)
Storage temperature -20 … +70 °C -20 … +70 °C
Image preprocessing
Analog controls Gain (0 … 48 dB)
Offset (0 … 255 LSB 12 Bit)
Gain (0 … 48 dB)
Offset (0 … 255 LSB 12 Bit)
Color models Mono Mono
Interfaces and connectors
Data interface Gigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer rate 100 Mbits/sec, Connector: M12 / 8 pol x-coded, screwable type Gigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer rate 100 Mbits/sec, Connector: M12 / 8 pol x-coded, screwable type
Power supply via M12/12 pins a-coded or Power over Ethernet (PoE) via M12/12 pins a-coded or Power over Ethernet (PoE)
Process interface M12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180) M12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180)
Mechanical data
Depth 50.8 mm 50.8 mm
Height 40 mm 40 mm
Lens mount C-mount C-mount
Material aluminum, hard-anodized aluminum, hard-anodized
Weight ≤ 137 g ≤ 137 g
Width 40 mm 40 mm
Non-volatile memory
Flash memory size 128 kB 128 kB
Sensor information
Exposure time 0.001 … 60000 ms 0.001 … 60000 ms
Mono/Color Mono Mono
Pixel size 2.74 × 2.74 µm 2.74 × 2.74 µm
Resolution 2848 × 2832 px 2848 × 2832 px
Sensor Sony IMX546 Gen4 Sony IMX546 Gen4
Sensor type 2/3″ CMOS 2/3″ CMOS
Shutter type Global shutter Global shutter
To the top