Fork sensors

  • through beam sensor
  • 120 mm
  • pulsed red LED
  • PNP
  • potentiometer, 270°
  • connector M8, 3 pin
  • -10 … 60 °C
  • IP 67

Fork sensors

  • through beam sensor
  • 120 mm
  • pulsed red LED
  • Push-Pull
  • potentiometer / IO-Link
  • connector M8, 3 pin
  • -25 … 60 °C
  • IP 67
Baud rate 38,4 kBaud (COM 2)
IO-Link Yes
Interface IO-Link V1.1
Condiciones ambientales
Operating temperature -10 … +60 °C -25 … +60 °C
Protection class IP 67 IP 67
Datos eléctricos
Current consumption max. (no load) 40 mA 30 mA
Output circuit PNP Push-pull / IO-Link
Output current 200 mA 200 mA
Output function Light / dark operate switchable Light / dark operate switchable
Reverse polarity protection Yes Yes
Short circuit protection Yes Yes
Switching frequency 2 kHz 5000 Hz , default
1500 Hz
250 Hz
8000 Hz
Voltage drop Vd <2,8 VDC <2,8 VDC
Voltage supply range +Vs 10 … 35 VDC 10 … 30 VDC
Datos generales
Ambient light immunity < 50 kLux
Hysteresis < 0,25 mm < 0,25 mm
Light indicator LED yellow LED yellow
Light source Pulsed red LED Pulsed red LED
Object size > 0,8 mm > 0,8 mm
Repeat accuracy 0,06 mm 0,06 mm
Response time / release time < 0,25 ms < 0,1 ms
Sensitivity adjustment Potenciómetro, 270 Potenciómetro, 270
IO-Link
Type Through beam sensor Through beam sensor
Wave length 660 nm 660 nm
Datos mecánicos
Connection types Connector M8, 3 pin Connector M8, 3 pin
Depth 12 mm 12 mm
Design U profile U profile
Fork width Sb 120 mm 120 mm
Height / length 90 mm 90 mm
Housing material Die-cast zinc Die-cast zinc
Penetration depth 60 mm 60 mm
Width / diameter 144 mm 144 mm
Hasta la cima