Switzerland
ch
English
USB 3.0, 12,3 Megapixel, Monochrome |
USB 3.0, 12,3 Megapixel, Monochrome |
|
|
|
|
|
| Acquisition formats | ||
| Image formats, aquisition frame rate max. (Burst Mode) | Full Frame, 4096 × 3000 px, max. 31 fps | Full Frame, 4096 × 3000 px, max. 31 fps |
| Image formats, interface frame rate max. | Full Frame, 4096 × 3000 px, max. 30 fps Binning 2×2, 2048 × 1500 px, max. 116 fps Binning 2×1, 2048 × 3000 px, max. 31 fps Binning 1×2, 4096 × 1500 px, max. 31 fps |
Full Frame, 4096 × 3000 px, max. 31 fps Binning 2×2, 2048 × 1500 px, max. 121 fps Binning 2×1, 2048 × 3000 px, max. 31 fps Binning 1×2, 4096 × 1500 px, max. 31 fps |
| Pixel formats | Mono8 Mono10 Mono12 Mono12 Packed |
Mono8 Mono10 Mono12 Mono12 Packed |
| Camera features | ||
| Acquisition / Interface | Burst Mode Adjustable Framerate Short Exposure Time Enable Device Link Throughput Limit Internal Image Buffer |
Burst Mode Adjustable Framerate Short Exposure Time Enable Device Link Throughput Limit Internal Image Buffer |
| Additional Functions | User Set Integrated temperature sensor Readable additional information (e.g. sensor information) Save Custom Data |
User Set Integrated temperature sensor Readable additional information (e.g. sensor information) |
| Auto Functions | Exposure Auto Gain Auto |
Exposure Auto Gain Auto |
| Basic Functions | Exposure Gain Trigger / Exposure Active (Flash) Binning 2x2 Partial Scan Offset Free Running Mode (Live Image) |
Exposure Gain Trigger / Exposure Active (Flash) Binning 2x2 Partial Scan Offset Free Running Mode (Live Image) |
| Calibration data | Camera calibration data (user defined storage for intrinsic / extrinsic camera parameters, and geometry distortion values) Customer data storage (128 bytes user defined) |
|
| Image Pre-processing | Image Flipping (X/Y) LUT / Gamma |
Image Flipping (X/Y) LUT / Gamma |
| Internal image buffer | 458 MB 13 images (Trigger Mode) 1 image (Free Running Mode) |
458 MB 13 images (Trigger Mode) 1 image (Free Running Mode) |
| Process Synchronization | Events Timer Trigger Delay Debouncer Counter Sequencer Trigger via Action CMD (GigE) Additional Output Modes (e.g. Trigger Ready) Chunk data inside transferred image Encoder support via Counter End trigger source |
Events Timer Trigger Delay Debouncer Counter Sequencer Trigger via Action CMD (GigE) Additional Output Modes (e.g. Trigger Ready) Chunk data inside transferred image Encoder support via Counter End trigger source |
| Synchronization | free running trigger |
free running trigger |
| Trigger delay | 0 … 2 sec, tracking and buffering of up to 256 trigger signals | 0 … 2 sec, tracking and buffering of up to 256 trigger signals |
| Trigger sources | Hardware Software |
Hardware Software |
| Conformity | ||
| Conformity | CE RoHS EAC BIS-CRS (R-41207004) |
CE RoHS |
| Data quality (EMVA 1288 typical) | ||
| Dark noise | 2.2 e- | 2.31 e- |
| Dynamic range | 71 dB | 69.8 dB |
| Quantum efficiency | 65.4 % @ 536 nm | 65.4 % @ 536 nm 65.2 % @ 533 nm |
| Saturation capacity | 10179 e- | 9097 e- |
| Signal-to-noise ratio | 40.1 dB | 39.6 dB |
| Digital I/Os | ||
| Lines | 1 input line 1 output line 2 general purpose lines |
1 input line 1 output line 2 general purpose lines |
| Electrical data | ||
| Operating voltage | 5 VDC (via USB3.0 interface) | 5 VDC (via USB3.0 interface) |
| Power consumption | Approx. 3.7 W @ 30 fps | Approx. 3.4 W @ 31 fps |
| Environmental conditions | ||
| Humidity | 10 … 90 % (non-condensing) | 10 … 90 % (non-condensing) |
| Operating temperature | 0 … +65 ° @ T = measurement point | 0 … +65 ° @ T = measurement point |
| Protection class | IP 40 (with mounted lens and cable) | IP 40 (with mounted lens and cable) |
| Storage temperature | -20 … +70 °C | -20 … +70 °C |
| Image preprocessing | ||
| Analog controls | Gain (0 … 48 dB) Offset (0 … 255 LSB 12 Bit) |
Gain (0 … 48 dB) Offset (0 … 255 LSB 12 Bit) |
| Color models | Mono | Mono |
| Interfaces and connectors | ||
| Data interface | USB 3.0, Transfer Rate 5000 Mbits/sec, Connector: USB 3.0 Micro B | USB 3.0, Transfer Rate 5000 Mbits/sec, Connector: USB 3.0 Micro B |
| Power supply | via USB 3.0 interface | via USB 3.0 interface |
| Process interface | M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180) | M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180) |
| Mechanical data | ||
| Depth | 38 mm | 38 mm |
| Height | 29 mm | 29 mm |
| Lens mount | C-mount | C-mount |
| Material | zinc die casting, baked varnish (until 02-2020 nickel-chrome-plated), IP 40 | zinc die casting, baked varnish |
| Weight | ≤ 90 g | ≤ 90 g |
| Width | 29 mm | 29 mm |
| Non-volatile memory | ||
| Flash memory size | 128 kB | 128 kB |
| Sensor information | ||
| Exposure time | 0.001 … 60000 ms | 0.001 … 60000 ms |
| Mono/Color | Mono | Mono |
| Pixel size | 3.45 × 3.45 µm | 3.45 × 3.45 µm |
| Resolution | 4096 × 3000 px | 4096 × 3000 px |
| Sensor | Sony IMX253 Gen2 | Sony IMX253 Gen2 |
| Sensor type | 1.1″ CMOS | 1.1″ CMOS |
| Shutter type | Global shutter | Global shutter |
