O500H.DP.2-GLUBO.PVCK

Article no.: 11252157

Distance measurement via IO-Link or analog output
Outstanding reliability and unrivalled immunity against ambient light
Baumer PinPoint LED: Small, homogeneous light spot with sharp edges
Manipulation-proof, simple teach-in via qTeach
IO-Link for extended parameterization options and additional diagnostic data
Robust stainless steel housing in hygienic design

1 pieces immediately available from stock

Technical data

show all

General data

Type

Distance measuring

Measuring distance Sd

60 … 550 mm

Measuring range Mr

490 mm

Adjustment

Teach-in and IO-Link

Power on indication

LED green

Output indicator

LED yellow

Repeat accuracy

≤ 200 … 5000 µm (Raw)
≤ 150 … 3750 µm (High Speed)
≤ 100 … 2500 µm (Standard)
≤ 50 … 1250 µm (High Accuracy)

Linearity error

± 3 % Mr

Beam type

Point

Suppression of reciprocal influence

Alignment optical axis

< 1°

Temperature drift

< 0,3 % Sde/K

Light Source

Light source

Pulsed PinPoint LED

Wave length

630 nm

Electrical data

Response time / release time

< 1.5 ms (Raw)
< 2.25 ms (High Speed Mode)
< 4.5 ms (Standard Mode)
< 14 ms (High Accuracy Mode)

Voltage supply range +Vs

12 … 30 VDC

Current consumption max. (no load)

30 mA

Voltage drop Vd

<2 VDC

Output circuit

Analog 0 ... 10 VDC
Push-pull / IO-Link

Output current

100 mA (push-pull)

Switching output

Light operate, switchable

Short circuit protection

Reverse polarity protection

Yes, Vs to GND

Communication interface

Interface

IO-Link V1.1.3

IO-Link port type

Class A

Baud rate

230,4 kBaud (COM 3)

Cycle time

≥ 0.7 ms

Process data length

48 Bit

Process data structure

Bit 0 = SSC1 (distance)
Bit 1 = SSC2 (distance)
Bit 2 = quality
Bit 3 = alarm
Bit 8-15 = scale factor
Bit 16-47 = 32 Bit measurement

Adjustable parameters

Switching point
Operation mode
Time filters
LED-function
Output logic
Output circuit
Analog output characteristic
Deactivate the sensor element
Locater function
Teach-in mode

Additional data

Distance
Excess gain
Device temperature

Mechanical data

Width / diameter

20.2 mm

Height / length

47.7 mm

Depth

36.4 mm

Design

Rectangular

Housing material

Stainless steel 1.4404 (V4A)

Front (optics)

PMMA

Connection types

Cable 4 pin, 2 m

Ambient conditions

Protection class

IP 68/69K & proTect+

Operating temperature

-25 … +60 °C

Storage temperature

-40 … +70 °C

Vibration (sinusoidal)

IEC 60068-2-6:2008
10 g at f = 10 - 2000 Hz, duration 150 min per axis

Shock (semi-sinusoidal)

IEC 60068-2-27:2009
50 g / 11 ms, 10 impulses per axis and direction

Software

show all

Software

Software – IODD V1.1 (O500x.Dx-U)
- (zip | 504 KB)

Downloads

show all

Data sheet

Data sheet – O500H.DP.2-GLUBO.PVCK
- FR (pdf | 720 KB)
Data sheet – O500H.DP.2-GLUBO.PVCK
- EN (pdf | 721 KB)
Data sheet – O500H.DP.2-GLUBO.PVCK
- DE (pdf | 722 KB)

Quickstart

- EN/DE/FR (pdf | 707 KB)

Certificates / approvals

DoC / CoC - O500
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 283 KB)

Drawings

show all

Accessories

show all

Peripherals

	IO-Link Master PROFINET, 8-Port, IP67 Article no.: 11215447	IP67 field device 8 ports for integrating sensors via IO-Link or I/O 2 PROFINET ports Supports Modbus/TCP and OPC UA
	IO-Link Master EtherNet/IP, 8-Port, IP67 Article no.: 11215460	IP67 field device 8 ports for integrating sensors via IO-Link or I/O 2 EtherNet/IP ports Supports Modbus/TCP and OPC UA
	IO-Link Master PROFINET, 8-Port, IP20 Article no.: 11215445	IP20 control cabinet device 8 ports for integrating sensors via IO-Link or I/O 2 PROFINET ports Supports Modbus/TCP and OPC UA
	IO-Link Master EtherNet/IP, 8-Port, IP20 Article no.: 11215448	IP20 control cabinet device 8 ports for integrating sensors via IO-Link or I/O 2 EtherNet/IP ports Supports Modbus/TCP and OPC UA
	ZTEST-ALL.DIGITAL Test unit for sensors digital Article no.: 11084377	LED (red/green) for digital PNP/NPN signals Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	ZTEST-ALL.ANALOG Test unit for sensors analog & digital Article no.: 11084376	Output via display (V or mA) or LED (PNP/NPN) Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	USB IO-Link Master USB IO-Link Master Article no.: 11048016	Integration of IO-Link sensors via USB Including power supply (EU, KOR, USA, AUS, UK) and USB cable
	SensControl Wireless IO-Link Master Article no.: 11214576	On-site configuration and monitoring of IO-Link devices (sensors/actuators) Communication via WLAN, Bluetooth LE and IO-Link Power supply by integrated rechargeable battery Increased mobility and easy to use via SensControl app
	ZTOOL-ALL.TPEN Teach Pen for sensors in metal housing Article no.: 11137318	Local Teach-in of sensors in metal housing
	ZTOOL-ALL.TPENJP Teach Pen for sensors in metal housing (USA, CAN, JP) Article no.: 11141124	Local Teach-in of sensors in metal housing