Technical data
Technical data - electrical ratings
Voltage supply
  • 7...30 VDC
Consumption w/o load
  • ≤100 mA
Initializing time
  • ≤200 ms after power on
Interface
  • SSI
Function
  • Multiturn
Steps per revolution
  • 8192 / 13 bit
Number of revolutions
  • 4096 / 12 bit
  • 65536 / 16 bit (option)
Additional outputs
  • SinCos
Bandwidth
  • 200 kHz (-3 dB)
Difference of SinCos amplitude
  • ≤20 mV
DC offset
  • ≤20 mV
Sensing method
  • Optical
Code
  • Gray
Code sequence
  • CW
Inputs
  • SSI clock
Incremental output
  • 2048 pulses (SinCos)
Interference immunity
  • EN 61000-6-2
Emitted interference
  • EN 61000-6-3
Diagnostic function
  • LED failure
  • Self-diagnosis
  • Code continuity check
Approval
  • CE
  • UL approval / E256710
Technical data - mechanical design
Size (flange)
  • ø60 mm
Shaft type
  • ø6 mm solid shaft
Flange
  • Synchro flange
Protection DIN EN 60529
  • IP 66
Operating speed
  • ≤5000 rpm (mechanical)
Operating torque typ.
  • 2 Ncm
Rotor moment of inertia
  • 25 gcm²
Admitted shaft load
  • ≤50 N axial
  • ≤120 N radial
Material
  • Housing: aluminium alloy
  • Shaft: stainless steel
Operating temperature
  • -20...+85 °C
Resistance
  • IEC 60068-2-6 Vibration 10 g, 10-2000 Hz
  • IEC 60068-2-27 Shock 100 g, 6 ms
Explosion protection
  • II 3 G Ex nA IIC T4 Gc X (gas)
  • II 3 D Ex tc IIIC T85°C Dc X (dust)
Weight approx.
  • 350 g
Connection
  • Terminal cover

Downloads
Declarations of conformity
Assembly instructions

Accessories
Mounting accessories
K 35

  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Protection against shaft currents with an insulated hub on non-drive end (ø11 H7)
  • Additional key possible

Connectors and cables
HEK 8
Diagnostic accessories
Analyzer for encoders HENQ 1100

Article no.: 11075858

  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages

Analyzer for encoders HENQ 1100 with a power pack

Article no.: 11075880

  • Analyzer for encoders
  • Continuous monitoring and display of encoder data (speed, angular position, position of the zero pulse, phase shift, pulse/pause ratio, voltage range etc.)
  • Continuous error monitoring (elimination of signal disturbances, comparison of the nominal/actual number of pulses per turn, check of the quadrature coding)
  • Individual error messages
  • Windows applications software for the PC, for graphical display and statistical evaluation of the measurements
  • Recording of measurements and error messages


To the top