Technical data
Technical data - electrical ratings
- Voltage supply
- 8...30 VDC
- Reverse polarity protection
- Yes
- Short-circuit proof
- Yes (HTL)
- Consumption w/o load
- ≤70 mA
- Pulses per revolution
- 1024
- Phase shift
- 90 ° ±10°
- Duty cycle
- 40…60 %
- Reference signal
- Zero pulse, width 90° ±10 %
- Sensing method
- Optical
- Output frequency
- ≤160 kHz (HTL)
- Output signals
- A+, B+, R+, A-, B-, R-
- Output stages
- HTL/push-pull
- Interference immunity
- EN 61000-6-2
- Emitted interference
- EN 61000-6-3
- Approval
- UL 508 / CSA 22.2
Technical data - mechanical design
- Size (flange)
- ø58 mm
- Shaft type
- ø6 x 10 mm, solid shaft with flat
- Admitted shaft load
- ≤40 N axial
- ≤80 N radial
- Flange
- Synchro flange
- Protection EN 60529
- IP 65
- Operating speed
- ≤12000 rpm (+20 °C, IP 65)
- Starting torque
- ≤0.015 Nm (+20 °C, IP 65)
- Material
- Housing: aluminium die-cast
- Flange: aluminium
- Solid shaft: stainless steel
- Operating temperature
- -40...+85 °C
- Relative humidity
- 90 % non-condensing
- Resistance
- EN 60068-2-6
- Vibration 30 g, 10-2000 Hz
- EN 60068-2-27
- Shock 300 g, 6 ms
- Connection
- Flange connector M23, 12-pin
- Weight approx.
- 300 g
Downloads
Data sheet
-
Data sheet – EIL580-SY
-
Data sheet – EIL580-SY
-
Data sheet – EIL580-SY
-
Data sheet – EIL580-SY
Quickstart
-
EIL580
Certificates / approvals
-
UL certificate E240061
Brochures / Catalogs
-
EIL580
-
EIL580
-
EIL580
Declaration of conformity
-
DoC / CoC - EIL580, ITD2LH00
CAD
-
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, cable axial, IP65 / STEP (EIL580-SY06.5Tx.xxxxx.A)
-
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, cable axial, IP67 / STEP (EIL580-SY06.7Tx.xxxxx.A)
-
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, cable radial, IP65 / STEP (EIL580-SY06.5Rx.xxxxx.A)
-
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, cable radial, IP67 / STEP (EIL580-SY06.7Rx.xxxxx.A)
-
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, cable tangential, IP65 / STEP (EIL580-SY06.5Px.xxxxx.A)
-
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, cable tangential, IP67 / STEP (EIL580-SY06.7Px.xxxxx.A)
-
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M12 axial, IP65 / STEP (EIL580-SY06.5Ax.xxxxx.A)
-
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M12 axial, IP67 / STEP (EIL580-SY06.7Ax.xxxxx.A)
-
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M12 radial, IP65 / STEP (EIL580-SY06.5Bx.xxxxx.A)
-
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M12 radial, IP67 / STEP (EIL580-SY06.7Bx.xxxxx.A)
-
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M23 axial, IP65 / STEP (EIL580-SY06.5Dx.xxxxx.A)
-
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M23 axial, IP67 / STEP (EIL580-SY06.7Dx.xxxxx.A)
-
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M23 radial, IP65 / STEP (EIL580-SY06.5Fx.xxxxx.A)
-
EIL580: Synchro flange (flute ø53 mm), solid shaft ø6 mm, connector M23 radial, IP67 / STEP (EIL580-SY06.7Fx.xxxxx.A)