2. EIL580-SY/EIL580P-SY
  3. Product comparison

Solid shaft with clamping or synchro flange

  • Encoder with solid shaft ø10 mm or ø6 mm
  • Optical sensing method
  • Max. 5000 pulses per revolution
  • Clamping or synchro flange
  • Industrial standard
  • Small profile depth

Solid shaft with synchro flange

  • Size ø58 mm
  • Precise optical sensing
  • Output signal level TTL or HTL
  • Synchro flange
  • Connection axial, radial or tangential
  • Pulses per revolution up to 5000
  • High protection up to IP 67
  • High resistance to shock and vibrations
Dowiadywać się
Admitted shaft load ≤10 N axial
≤20 N radial		 ≤40 N axial
≤80 N radial
Approval UL approval / E217823 UL 508 / CSA 22.2
Connection Connector M23, 12-pin
Cavo 2 m		 Flange connector M12, 8-pin
Flange connector M23, 12-pin
Cavo
Consumption typ. 80 mA (5 VDC, w/o load)
60 mA (24 VDC, w/o load)
180 mA (4.5 VDC, w/o load)
Consumption w/o load ≤70 mA
Duty cycle 40…60 %
Emitted interference EN 61000-6-3 EN 61000-6-3
Flange Synchro flange Synchro flange
Interference immunity EN 61000-6-2 EN 61000-6-2
Material Housing: steel
Housing: aluminium (connection ‑A)
Flange: aluminium		 Housing: aluminium die-cast
Flange: aluminium
Solid shaft: stainless steel
Operating speed ≤12000 giri/min IP 42
≤6000 giri/min IP 65		 ≤6000 rpm (+20 °C, IP 67)
≤12000 rpm (+20 °C, IP 65)
Operating temperature -20...+85 °C -40...+85 °C
Operating torque typ. 0,0023 Nm (IP 42)
0,026 Nm (IP 65)
Output frequency ≤200 kHz (24K)
≤300 kHz (05A/25W)		 ≤300 kHz (TTL)
≤160 kHz (HTL)
Output signals A 90° B, N + canali invertiti A+, B+, R+, A-, B-, R-
Output stages Antivalent
Push-pull short-circuit proof
Push-pull antiv. short-circuit proof		 TTL/RS422
HTL/push-pull
Phase shift 90 ° ±10°
Protection EN 60529 IP 42
IP 65		 IP 65 (without shaft seal)
IP 67 (with shaft seal)
Pulses per revolution 10 … 5000 100 … 5000
Reference signal Zero pulse, width 90° Zero pulse, width 90° ±10 %
Relative humidity 95 % non-condensing 90 % non-condensing
Resistance EN 60068-2-6
Vibration 10 g, 10-200 Hz
EN 60068-2-27
Shock 50 g, 11 ms		 EN 60068-2-6
Vibration 30 g, 10-2000 Hz
EN 60068-2-27
Shock 300 g, 6 ms
Reverse polarity protection Yes
Sensing method Optical Optical
Shaft type ø6 mm solid shaft (synchro flange) ø6 x 10 mm, solid shaft with flat
Short-circuit proof Yes (HTL)
Yes (TTL, max. 1 s and 1 signal)
Size (flange) ø58 mm ø58 mm
Starting torque ≤0,015 Nm (+20 °C, IP 65)
≤0,02 Nm (+20 °C, IP 67)
Voltage supply 5 VDC ±10 %
10...30 VDC
4,5...30 VDC		 5 VDC ±5 %
8...30 VDC
4,75...30 VDC
Weight approx. 300 g 300 g
Na szczyt