Polska
pl
polski
Solid shaft with clamping or synchro flange |
Solid shaft with synchro flange |
|
|
|
|
|
| Admitted shaft load | ≤10 N axial ≤20 N radial |
≤40 N axial ≤80 N radial |
| Approval | UL approval / E217823 | UL 508 / CSA 22.2 |
| Connection | Connector M23, 12-pin Cavo 2 m |
Flange connector M12, 8-pin Flange connector M23, 12-pin Cavo |
| Consumption typ. | 80 mA (5 VDC, w/o load) 60 mA (24 VDC, w/o load) |
|
| Consumption w/o load | ≤70 mA | |
| Duty cycle | 45…55 % typical at 1024, 2048 ppr (further see table Duty cycle) | |
| Emitted interference | EN 61000-6-3 | EN 61000-6-3 |
| Flange | Synchro flange | Synchro flange |
| Initializing time | ≤ 30 ms dopo aver acceso il dispositivo | |
| Interference immunity | EN 61000-6-2 | EN 61000-6-2 |
| Material | Housing: steel Housing: aluminium (connection ‑A) Flange: aluminium |
Housing: aluminium die-cast Flange: aluminium Solid shaft: stainless steel |
| Operating speed | ≤12000 giri/min IP 42 ≤6000 giri/min IP 65 |
≤6000 rpm (+20 °C, IP 67) ≤12000 rpm (+20 °C, IP 65) |
| Operating temperature | -20...+85 °C | -40...+100 °C |
| Operating torque typ. | 0,0023 Nm (IP 42) 0,026 Nm (IP 65) |
|
| Output frequency | ≤300 kHz (24K) ≤1300 kHz (05A) |
≤300 kHz (TTL) ≤160 kHz (HTL) |
| Output signals | A 90° B, N + canali invertiti | A+, B+, R+, A-, B-, R- |
| Output stages | Antivalent Push-pull short-circuit proof Push-pull antiv. short-circuit proof |
TTL/RS422 HTL/push-pull |
| Programmable parameters | Output level TTL/HTL Pulse number 1...65536 Zero pulse width 90°/180° Zero pulse position Signal sequence |
|
| Protection EN 60529 | IP 42 IP 65 |
IP 65 (without shaft seal) IP 67 (with shaft seal) |
| Pulses per revolution | 7200 … 320000 | 1 … 65536 |
| Reference signal | Zero pulse, width 90° | Zero pulse 90° or 180° |
| Relative humidity | 95 % non-condensing | 90 % non-condensing |
| Resistance | EN 60068-2-6 Vibration 10 g, 10-200 Hz EN 60068-2-27 Shock 50 g, 11 ms |
EN 60068-2-6 Vibration 30 g, 10-2000 Hz EN 60068-2-27 Shock 300 g, 6 ms |
| Reverse polarity protection | Yes | |
| Sensing method | Optical | Optical |
| Shaft type | ø6 mm solid shaft (synchro flange) | ø6 x 10 mm, solid shaft with flat |
| Short-circuit proof | Yes | |
| Size (flange) | ø58 mm | ø58 mm |
| Starting torque | ≤0,015 Nm (+20 °C, IP 65) ≤0,02 Nm (+20 °C, IP 67) |
|
| Voltage supply | 5 VDC ±10 % 10...30 VDC |
4,75...30 VDC |
| Weight approx. | 300 g | 300 g |
