Polska
pl
polski
Distance sensors |
||
|
|
|
|
|
|
|
|
| Additional data | Distance Excess gain Device temperature |
|
| Adjustable parameters | Switching point Operation mode Time filters LED-function Output logic Output circuit Analog output characteristic Deactivate the sensor element Locater function Teach-in mode |
|
| Alarm output | Push-pull | |
| Alignment optical axis | < 1° | |
| Approvals/certificates | Ecolab Adapted from EHEDG |
|
| Baud rate | 230,4 kBaud (COM 3) | |
| Beam diameter | 8 mm | |
| Beam type | Point | Point |
| Cycle time | ≥ 0,7 ms | |
| Dryf temperaturowy | < 0,1 % Sde/K | < 0,3 % Sde/K |
| Front (optics) | PMMA | PMMA |
| Głębokość | 34,3 mm | 36,4 mm |
| IO-Link port type | Class A | |
| Interface | IO-Link V1.0 | IO-Link V1.1.3 |
| Light source | Pulsed point source LED | Pulsed PinPoint LED |
| Linearity error | ± 1,5 … 4 mm | ± 3 % Mr |
| Load resistance | < (+Vs - 6 V) / 0,02 A | |
| Load resistance (analog I) | < (+Vs - 10 V) / 0,02 A | |
| Materiał obudowy | Stainless steel 1.4404 (V4A) | Stainless steel 1.4404 (V4A) |
| Measuring distance Sd | 50 … 400 mm | 60 … 550 mm |
| Measuring range Mr | 490 mm | |
| Metoda programowania | IO-Link | Teach-in and IO-Link |
| Obwód wyjściowy | Analog | Analog 4 ... 20 mA Push-pull / IO-Link |
| Output indicator | LED yellow | |
| Pobór prądu max. (no load) | 80 mA | 30 mA |
| Powtarzalność | ≤ 200 … 5000 µm (Raw) ≤ 150 … 3750 µm (High Speed) ≤ 100 … 2500 µm (Standard) ≤ 50 … 1250 µm (High Accuracy) |
|
| Process data length | 48 Bit | |
| Process data structure | Bit 0 = SSC1 (distance) Bit 1 = SSC2 (distance) Bit 2 = quality Bit 3 = alarm Bit 8-15 = scale factor Bit 16-47 = 32 Bit measurement |
|
| Prąd wyjściowy | 100 mA | 100 mA (push-pull) |
| Response time / release time | < 3 ms | < 1,5 ms (Raw) < 2,25 ms (High Speed Mode) < 4,5 ms (Standard Mode) < 14 ms (High Accuracy Mode) |
| Rodzaj przyłącza | Flylead connector M12, L=300 mm | Flylead connector M12, L=300 mm |
| Rozdzielczość | 100 … 1000 µm | |
| Shock (semi-sinusoidal) | IEC 60068-2-27:2009 50 g / 11 ms, 10 impulses per axis and direction |
|
| Soiled lens indicator | LED red | |
| Spadek napięcia Vd | <2 VDC | |
| Stopień ochrony | IP 68/69K & proTect+ | IP 68/69K & proTect+ |
| Storage temperature | -40 … +70 °C | |
| Suppression of reciprocal influence | Tak | |
| Switching output | Light operate, switchable | |
| Sygnalizacja zasilania | LED green | LED green |
| Sygnał wyjściowy | 4 ... 20 mA | |
| Szerokość / średnica | 19,6 mm | 20,2 mm |
| Teach-in range min. | > 20 mm | |
| Temperatura pracy | 0 … +50 °C | -25 … +60 °C |
| Typ | Sześcienny | Sześcienny |
| Typ specjalny | Hygienic design | |
| Type | Distance measuring | |
| Vibration (sinusoidal) | IEC 60068-2-6:2008 10 g at f = 10 - 2000 Hz, duration 150 min per axis |
|
| Wave length | 660 nm | 630 nm |
| Wysokość | 52,2 mm | 47,7 mm |
| Zabezpieczenie przeciw zmianie polaryzacji | Yes, Vs to GND | Yes, Vs to GND |
| Zabezpieczenie przeciwzwarciowe | Tak | Tak |
| Zakres napięcia zasilania +Vs | 12 … 26 VDC | 12 … 30 VDC |
