O200.EL-NV1T.72CV/FREC_H006

Dane techniczne

pokaż wszystko

Type

Through beam sensor

Nadajnik / odbiornik

Odbiornik

Light source

Use with pulsed red laser diode

Actual range Sb

Nominal range Sn

Smallest object recognizable typ.

3 mm (0,5 mm with aperture)

Alignment / soiled lens indicator

Flashing output indicator

Output indicator

LED yellow

Sygnalizacja zasilania

LED green

Sensitivity adjustment

qTeach

Suppression of reciprocal influence

Response time / release time

< 0,1 ms
< 0,12 ms

Jitter

< 0,03 ms
< 0,05 ms

Zakres napięcia zasilania +Vs

10 … 30 VDC

Pobór prądu max. (no load)

20 mA (@ 10 VDC)

Current consumption typ.

10 mA (@ 24 VDC)

Spadek napięcia Vd

<2 VDC

Output function

Light / dark operate

Obwód wyjściowy

NPN komplementarny

Prąd wyjściowy

50 mA

Zabezpieczenie przeciwzwarciowe

Zabezpieczenie przeciw zmianie polaryzacji

Szerokość / średnica

8 mm

Wysokość

25,1 mm

Głębokość

14,1 mm

Typ

Sześcienny

Mechanical mounting

Threaded sleeves M3 (stainless steel)

Materiał obudowy

Plastic (ASA, PMMA)

Front (optics)

PMMA

Rodzaj przyłącza

Cable 4 pin, 2 m

Cable characteristics

PVC / PVC 4 x 0.08 mm²

Temperatura pracy

-25 … +50 °C

Stopień ochrony

IP 67

Model 3D

pokaż wszystko

Model 3D

Tworzenie modeli CAD wymaga zewnętrznej rejestracji w CADENAS.

Pliki do pobrania

pokaż wszystko

Data sheet

Data sheet – O200.EL-NV1T.72CV/FREC_H006
- ZH (pdf | 743 KB)
Data sheet – O200.EL-NV1T.72CV/FREC_H006
- FR (pdf | 691 KB)
Data sheet – O200.EL-NV1T.72CV/FREC_H006
- DE (pdf | 694 KB)
Data sheet – O200.EL-NV1T.72CV/FREC_H006
- EN (pdf | 693 KB)

Operating Manual

Quickstart – O200 Xpert
- EN/DE/FR/ES/IT/ZH (pdf | 667 KB)

Certificates / approvals

DoC / CoC - O200
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 280 KB)

EPLAN

Link do portalu danych
- Link do portalu danych

Schematy

pokaż wszystko

Excess gain curve

(png | 222 KB)

Rysunki

pokaż wszystko

Drawings

(png | 63 KB)

Schemat łączeniowy

(png | 89 KB)

Akcesoria

pokaż wszystko

Fitting emitter

	O200.TL-GZZY.72CV/FIN2 Through beam sensors - miniature Nr artykułu: 11228766	Most secure object detection due to the barrier principle Parallel laser beam for uniform detection over the measuring range Deactivation of the transmitter diode via test input or IO-Link Robust housing with stainless steel spacer sleeves
	O200.TL-GZZY.72NV/FIN2 Through beam sensors - miniature Nr artykułu: 11225048	Most secure object detection due to the barrier principle Parallel laser beam for uniform detection over the measuring range Deactivation of the transmitter diode via test input or IO-Link Robust housing with stainless steel spacer sleeves
	O200.TL-GZZY.72CV/FIN2_H006 Through beam sensors - miniature Nr artykułu: 11230776	Most secure object detection due to the barrier principle Parallel laser beam for uniform detection over the measuring range Deactivation of the transmitter diode via test input or IO-Link Quick mounting by means of M3 threaded bushes made of stainless steel
	O200.TL-GZZY.72NV/FIN2_H006 Through beam sensors - miniature Nr artykułu: 11230777	Most secure object detection due to the barrier principle Parallel laser beam for uniform detection over the measuring range Deactivation of the transmitter diode via test input or IO-Link Quick mounting by means of M3 threaded bushes made of stainless steel

Peripherals

	ZTEST-ALL.DIGITAL Test unit for sensors digital Nr artykułu: 11084377	LED (red/green) for digital PNP/NPN signals Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	ZTEST-ALL.ANALOG Test unit for sensors analog & digital Nr artykułu: 11084376	Output via display (V or mA) or LED (PNP/NPN) Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)

Mounting accessories

	10150326 Sensofix series 10 / series 20 Nr artykułu: 10150326	Clamps made of stainless steel Ball pivots made of galvanized steel Mounting panel made of stainless steel
	ZADAP-200.STRAIGHT Mounting bracket O200 Nr artykułu: 11206601	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.ANGLE_L Mounting bracket O200 (L design) Nr artykułu: 11206602	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.ANGLE_S Mounting bracket O200 (S design) Nr artykułu: 11206603	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.SERIES10 Mounting bracket O200 - Retrofit for sensors series 10 Nr artykułu: 11208477	Material: plastic

Lenses and components

	ZBLEN-200.R_0.5MM Slot aperture stickers series 200 Nr artykułu: 11206587	Material: stainless steel Contents: 6 pieces (3 Sets) screw mounting Aperture: Ø 0,5 mm
	ZBLEN-200.R_1MM Slot aperture stickers series 200 Nr artykułu: 11206589	Material: stainless steel Contents: 6 pieces (3 Sets) screw mounting Aperture: Ø 1 mm
	ZBLEN-200.R_1.5MM Slot aperture stickers series 200 Nr artykułu: 11206610	Material: stainless steel Contents: 6 pieces (3 Sets) screw mounting Aperture: Ø 1,5 mm
	ZBLEN-200.R_2MM Slot aperture stickers series 200 Nr artykułu: 11206611	Material: stainless steel Contents: 6 pieces (3 Sets) screw mounting Aperture: Ø 2 mm
	ZBLEN-200.MIXED Slot aperture stickers series 200 Nr artykułu: 11206614	Material: stainless steel Contents: 1 pieces screw mounting Aperture: Round Ø 0,5 mm, 1 mm, 1,5 mm, 2 mm Aperture: Slit 0,5 x 3 mm vertical, 0,5 x 3 mm horizontal
	ZBLEN-200.SLIT_HOR Slot aperture stickers series 200 Nr artykułu: 11206613	Material: stainless steel Contents: 6 pieces (3 Sets) screw mounting Aperture: 0,5 mm x 3 mm horizontal
	ZBLEN-200.SLIT_VER Slot aperture stickers series 200 Nr artykułu: 11206612	Material: stainless steel Contents: 6 pieces (3 Sets) screw mounting Aperture: 0,5 mm x 3 mm vertical