O200.RL.T-GW1J.72CV/FIN1_H006

Nr artykułu: 11230783

Extended functional reserve capacities for maximum reliability
Long-term stable detection of transparent objects thanks to compensation of environmental influences
Parallel laser beam for uniform detection over the measuring range
Manipulation-proof, simple teach-in via qTeach or line teach
IO-Link for extended parameterization options and additional diagnostic data
Quick mounting by means of M3 threaded bushes made of stainless steel

dostępność na zapytanie

Dane techniczne

pokaż wszystko

Type

Retro-reflective sensor

Version

Transparency object detection

Light source

Pulsed red laser diode

Actual range Sb

0,8 m

Nominal range Sn

1,2 m

Polarization filter

Minimal signal attenuation

Alignment / soiled lens indicator

Flashing output indicator

Output indicator

LED yellow

Sygnalizacja zasilania

LED green

Sensitivity adjustment

Teach-in and IO-Link

Laser class

Distance to focus

Parallel beam

Wave length

680 nm

Suppression of reciprocal influence

Alignment optical axis

< 1,5°

Response time / release time

< 0,25 ms

Jitter

< 0,06 ms

Zakres napięcia zasilania +Vs

10 … 30 VDC

Pobór prądu max. (no load)

20 mA (@ 10 VDC)

Current consumption typ.

10 mA (@ 24 VDC)

Spadek napięcia Vd

<2 VDC

Output function

Light / dark operate

Obwód wyjściowy

Push-pull

Prąd wyjściowy

50 mA

Zabezpieczenie przeciwzwarciowe

Zabezpieczenie przeciw zmianie polaryzacji

Baud rate

230,4 kBaud (COM 3)

Adjustable parameters

Switching point
Switching hysteresis
Time filters
LED status indicators
Output logic
Counter
Deactivate the sensor element
Find Me function
Teach-in mode
Background tracking

IO-Link port type

Class A

Process data length

32 Bit

Process data structure

Bit 0 = SSC1 (presence)
Bit 2 = quality
Bit 3 = alarm
Bit 5 = SSC4 (counter)
Bit 16-31 = 16 Bit measurement

Interface

IO-Link V1.1

Additional data

Signal attenuation
Excess gain
Operating cycles
Device temperature

Cycle time

≥ 0,6 ms

Szerokość / średnica

8 mm

Wysokość

25,1 mm

Głębokość

15,8 mm

Typ

Sześcienny

Mechanical mounting

Threaded sleeves M3 (stainless steel)

Materiał obudowy

Plastic (ASA, PMMA)

Front (optics)

PMMA

Rodzaj przyłącza

Cable 4 pin, 2 m

Cable characteristics

PVC / PVC 4 x 0.08 mm²

Temperatura pracy

-20 … +50 °C

Stopień ochrony

IP 67

Model 3D

pokaż wszystko

Model 3D

Tworzenie modeli CAD wymaga zewnętrznej rejestracji w CADENAS.

oprogramowanie

pokaż wszystko

Software

Software – IODD V1.1 (O200x.Rx.T)
- (zip | 260 KB)

Pliki do pobrania

pokaż wszystko

Data sheet

Data sheet – O200.RL.T-GW1J.72CV/FIN1_H006
- ZH (pdf | 1 MB)
Data sheet – O200.RL.T-GW1J.72CV/FIN1_H006
- FR (pdf | 1 MB)
Data sheet – O200.RL.T-GW1J.72CV/FIN1_H006
- DE (pdf | 1 MB)
Data sheet – O200.RL.T-GW1J.72CV/FIN1_H006
- EN (pdf | 1 MB)

Operating Manual

Quickstart – O200 Xpert Transparent
- EN/DE/FR/ES/IT/ZH (pdf | 741 KB)

Software Manual

Operating instruction – O200 IO-Link
- EN (pdf | 1 MB)

Certificates / approvals

DoC / CoC - O200
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 280 KB)

EPLAN

Link do portalu danych
- Link do portalu danych

Schematy

pokaż wszystko

Excess gain curve

(png | 147 KB)

Rysunki

pokaż wszystko

Akcesoria

pokaż wszystko

Reflectors

	FTDR 048U048 Reflector rectangular 60 x 51 mm Nr artykułu: 11229661	Fastening method screw mounting For Retro-reflective sensors Ultrafine micro structure For laser light sensors and transparent object detection
	FTDR 020U020 Reflector rectangular 32 x 20 mm Nr artykułu: 11229662	Fastening method screw mounting For pocket-size edge sensor PosCon
	FTDF 025U025 Reflective tape rectangular 25 x 25 mm Nr artykułu: 11229663	Fastening method self-adhesive For Retro-reflective sensors Ultrafine micro structure For laser light sensors and transparent object detection
	FTDF 040U250 Reflector rectangular 250 x 40 mm Nr artykułu: 11117727	Fastening method self-adhesive For Retro-reflective sensors Ultrafine micro structure For laser light sensors and transparent object detection

Peripherals

	ZTEST-ALL.DIGITAL Test unit for sensors digital Nr artykułu: 11084377	LED (red/green) for digital PNP/NPN signals Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	ZTEST-ALL.ANALOG Test unit for sensors analog & digital Nr artykułu: 11084376	Output via display (V or mA) or LED (PNP/NPN) Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	USB IO-Link Master USB IO-Link Master Nr artykułu: 11048016	Integration of IO-Link sensors via USB Including power supply (EU, KOR, USA, AUS, UK) and USB cable

Mounting accessories

	10150326 Sensofix series 10 / series 20 Nr artykułu: 10150326	Clamps made of stainless steel Ball pivots made of galvanized steel Mounting panel made of stainless steel
	ZADAP-200.STRAIGHT Mounting bracket O200 Nr artykułu: 11206601	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.ANGLE_L Mounting bracket O200 (L design) Nr artykułu: 11206602	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.ANGLE_S Mounting bracket O200 (S design) Nr artykułu: 11206603	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.SERIES10 Mounting bracket O200 - Retrofit for sensors series 10 Nr artykułu: 11208477	Material: plastic